Servers | Hosting

Posts Tagged ‘Servers’

Motherboard Fsb 800

Thursday, April 1st, 2010

Motherboard Fsb 800

PC Computer Motherboard Analyser Diagnostic Card Tester

$0.01

Apple Powermac Power Mac G4 MDD Motherboard Logic Board

$0.01

Dell XPS 420 Motherboard TP406

$0.01

which motherboard to buy for intel 3 ghz ,800 fsb cpu?

should it be 945G or 945P or 955x based chipset. How are intel manufactured mobos or should i go in for ASUS or GIGABYTE or ASROCK. It shouldn’t be too expensive. max. upto 6000 indian rs / 130 us dollars.
It is an intel pentium 4 630 cpu

for intel P4 3Ghz, 800FSB, 945G chipset is cheap and best available in the market with fair scope of upgrade in u deside to move to Core2Duo processors later.

ASUS 945G chipset based board cost around 4,200 Rs, it has integrated graphics and audio. it also has PCI-E 16x slot for external graphics card if u want to add it latter. 945 supports DDR2 RAM in dual channel configuration, with maximum speed of 677MHz. supports SATA and PATA drives, its bios supports overclocking, which now most of the motherboards do in one way or other.

boards based on 945G from GIGABYTE is also very nice with same features, but i dont have idea of its price.

hope it helps

CPU-Z only reading pc6400 for me

have just bought 4gb of corsair ddr2-pc8500 1066mz RAM, when I moved into cpu-z then I found that it only reads me at pc6400. Why it’s going on like this and what should be the resolution for this. I have attached the pics , please just consider on my issues and tell me effective solution for this….Thanx
Attached Images
memory cpu-z.JPG (45.4 KB, 0 views)
cpu-z spd.JPG (50.7 KB, 1 views)

CPU-Z only reading pc6400 for me

Re: CPU-Z only reading pc6400 for me
There is no any issue with your installed RAM memory but the reason of such type of issue is that you are lacking with some bad configuration and In this situation, you require to change your divider in BIOS and after making the chnages, just save that settings properly. According to this output, you are currently working with 3:4 divider.Just make it to 2:1 or 800 and run up the fsb.Absolutely, you got the fix and just try to do and post me if you are getting any issues in between…
____
Thanks for prompt reply but I didn’t do it earlier and need to know something more about.As you told me, I have checked all this and I am not sure how to set my divider to a 2:1 configuration …The thing is that currently my multiplier is at 8 FSB is at 400 and my dram is at 1066 in my BIOS…

CPU-Z only reading pc6400 for me

Re: CPU-Z only reading pc6400 for me
I got this whole discussion and find out everything is going very well 400/533=6/8, 6/8=3:4. Your RAM is running at 1066Mhz (DDR2). You need not desired to run at 2:1 and you are unable to do at that. 2:1 is just stupid. You are good what is your problem? You are running at PC8500, PC8500 is just OC’d PC6400 so it reports incorrect sometimes.

CPU-Z only reading pc6400 for me

One thing more, CPUZ reads it as pc6400 but you will keep looking on your SPD tab its got a reading for 533mhz that with Double Data Rate indicates 1066mhz there’s nothing going incorrect there and In case, if it was not 1066mhz memory there would be no reading for 533mhz.
_
CPU-Z only reading pc6400 for me
I am a new guy in this and done a sort of tweaking thing regarding this section. but it looks that the Mushkin PC8500 memory that I purchased has been giving users the same problem its concurring for me, which is that on CPU-Z its reading as PC6400. I purchased 996599 (2x2gb) and when I was working with my tech savvy friend today and he couldn’t seem to get it to register as PC8500. Currently, my EPP rating is 533mhz and my timings are configured to 5-5-5-15 and the system is absolute stable -Actually, my query is that the memory is running at 1066mhz or is it obviously running at 800mhz?

For reference I am using a Gigabyte x38-DS4 board with a e8400 that is working very well. Any advice or anything?

Re: CPU-Z only reading pc6400 for me
If you are getting actually into the cpuZ SPD tab, this is OK and very fine because it’s normal. When cpuZ memory tab displaying 400Mhz(800 actual) this indicates that RAM is still configured at 800Mhz, when configured to 1066Mhz it will display 533Mhz under the cpuZ memory tab

Quote:
I purchased 996599 (2x2gb) and when I was working with my tech savvy friend today and he couldn’t seem to get it to register as PC8500. Currently, my EPP rating is 533mhz and my timings are configured to 5-5-5-15